Due to customers experiencing issues with the poor quality of discharge fabrics, MagnaPrint® HB has been developed as a type of mock discharge system that produces discharge look prints with a soft hand on non-discharge fabric. Printed on top of either a Discharge or AquaFlex White V2 underbase (dependent on fabric). MagnaPrint® HB system can be printed through high mesh counts up to 120 (305) mesh for best results, and therefore has a very low ink consumption resulting in soft hand and extremely cost-effective prints.
FABRIC TYPESCotton / Poly Cotton blends
MESH62 - 120T (158 - 305)
SQUEEGEEMedium 65° Shore Rectangular
STENCILWater resistant emulstion
CURE TEMP2 - 2½ minutes at 165°C (330°F)
PIGMENT LOADINGUp to 9% MagnaPrint® Eco Pigments
ADDITIVESSoftener TS Conc, Crosslinker 100
STORAGEIn cool place properly closed: >5°C (40°F) <25°C (77°F)
HEALTH & SAFETYMSDS available on request
Module 2: Printing with medium solids onto non-dischargeable fabrics.
Learn how MagnaPrint® HB, the soft hand opaque water-based printing system, enables you to achieve the discharge look and feel for tonal artwork on high mesh counts and non-dischargeable fabric.GO TO PAGE